“Anti-gravitation engine” (“flying saucer”) – electromagnetic engine.

I offer you another innovation to invest to: “Anti-gravitation engine” (“flying saucer”) – electromagnetic engine. The most simple example (basic principle) of the anti-gravitation engine is as follows: It’s necessary to have a metal shaft on which the ordinary circular magnets with an orifice in the interior of the circle magnet are put on observing their polarity in such a way that all the magnets are put on the shaft in the same polarity sequence. Then, on the shaft is put (more below) a bearing, to which is screwed on, under an angle, another shift, on which a circular magnet with an orifice in the middle is put on observing the same polarity. Now, when the lower shaft is turning around on a bearing, the lower magnet is turning around also having the wider go around the vertical center line of the whole construction, provided for, there is a small electric battery engine that makes it work so. To make this construction hover in the air above the earth it’s necessary to put the similar circular magnets with an orifice in the middle on the floor observing the back polarity as to this of the magnets on the anti-gravitation engine. Such magnets on the floor should be placed in a way to make for a kind of corridor where the different polarity of magnets will make the engine hover in the framework of such a road made by the magnets on the floor. When the electrical engine makes the bearing turn over the smaller shaft with another circular magnet (or magnets) put under the angle, the anti-gravitation engine will move along the road of magnets placed on the floor (not touching the surface but moving above it) because of small dis-balance in the electro-magnetic field, because the shaft with magnets will be attracted from one magnet on the surface to another. Such an engine may be operated by distanced mechanism (remote control). On this basic mechanism, a hovering car may be made. It’s necessary to have four such anti-gravitation engines in the corners of the body of such an automobile where the wheels are. Now, the construction is more stable. It may have four propeller engines at the places of the car body where the light signals are, such propeller engine may make the car move in the air along the road made of the circular magnets, provided for the car hovers in the air because of the four anti-gravitation engines. Such propellers may allow the car to get speed or stop depending on what maneuver the driver needs at the given moment of time. The more so, at the cross-roads the authorities may make, according to the same principle of differently polarized circular magnets, the coercive slowing down the car if the traffic lights turn to stop moving. For that purpose the car should have four circular magnets at the places where the light signals and lights usually are. The differently polarized circular magnets of different cars will make them observe the distance and act as an electromagnetic bumper (cushion) to avoid collision. Of course, such anti-gravitation cars need roads made of circular magnets with an orifice in the interior. Sometimes, such circular magnets should be placed on platforms if we say about country roads or crossing a river. Still, it’s effective because of higher speed, less energy lost in friction, ability to build such roads in mountains, forests and other places of complex landscape. All in all, such a “hover” car will consume minimum of gasoline or electrical energy. In addition, the modern technology allows for producing big magnets. Maxim Yuryevich Zuzin